20-30 minutes

20-30 minutes

Robotics, engineering, prosthetics

Ben Finio, PhD, Science Buddies


Do you know anyone who has had a hand or an arm injured in an accident? What if you could build them a robotic hand to help them accomplish everyday tasks like writing, picking up a glass, or opening a door? This activity will show you how to build a simple robotic hand using common household materials.

This activity is not recommended for use as a science fair project. Good science fair projects have a stronger focus on controlling variables, taking accurate measurements, and analyzing data. To find a science fair project that is just right for you, browse our library of over 1,200 Science Fair Project Ideas or use the Topic Selection Wizard to get a personalized project recommendation.


Note: This is an engineering design project. The procedure will show you one way to build a robotic hand, but this is just a suggested list of materials to get you started. You can modify the design and substitute other materials.

  • Modeling clay. The clay can be reusable, air-dry, or oven-dry.

  • Drinking straws

  • String

  • Tweezers

  • Small rubber bands

  • Paper clips

  • Scissors

  • Needle

  • Cardboard tube

  • Assorted objects to grasp


  1. Keep testing your robot hand and try using it to pick things up. Try objects of different shapes, sizes, and weights. Do you notice any problems with your design? Do you have trouble picking up certain items?

    Think about:

    How could you change your design to make it better?

  2. Try improving your design so it can do a better job picking up different objects. Is it better if you control all the fingers with one string, or individually? What if you change the angle of the fingers relative to each other, or the location of the joints? What else can you change?

  3. If you are using air-dry or oven-bake clay, finalize your design before you let the clay dry. Caution: adult supervision is required for oven-bake clay. Putting plastic drinking straws in the oven may cause them to melt, depending on the baking temperature for the clay. If you notice any funny smells or see your straws melting, immediately turn off the oven and remove the robot hand.

What Happened?

Using the materials suggested in this activity, you should be able to build a robotic hand that can pick up small, lightweight objects. Objects that are slightly squishy or have rough textures (like a block of foam) may be easier to pick up than objects that are hard and smooth (like a table tennis ball). You may find it difficult to pick up heavy objects (like a coffee mug) because the straws are not sturdy enough and will bend backwards. The shape and variety of objects that you can pick up will depend heavily on how many fingers your hand has and how you arrange them. For example, you could build a hand that is very good at picking up paper cups, but has a hard time with table tennis balls, or vice versa. Building a robot hand that can easily pick up a wide variety of objects, like a human hand can, is a very difficult challenge that professional engineers are still working on to this day!

Digging Deeper

Your hand is made up of bones, muscles, joints, and tendons. The bones provide the rigid structure for the hand, like the straws in this project. The joints provide places for the fingers to bend, like the notches in your straws. The tendons pull on the joints to make the different segments bend, just like the string in your robot hand. The muscle in your robot hand is still provided by a human, since ultimately you are the one pulling on the paper clips. Real robotic hands have electric motors in them that act like muscles.

The science of developing robotic hands, along with other artificial limbs and organs, is called prosthetics. Scientists, engineers, and doctors work together to develop artificial body parts as replacements for people who lose organs or limbs due to accidents or disease. Try searching online for other types of prosthetic limbs and organs that have been developed. You might be amazed at what you find!

icon scientific method

Ask an Expert

Curious about the science? Post your question for our scientists.

For Further Exploration

  • Can you build a hand out of sturdier materials that can lift heavier objects? A trip to the hardware store might help you discover what materials you could use.
  • Can you expand your robotic hand so it includes other joints? What about a wrist, or an entire arm including an elbow and shoulder?

Project Ideas

Science Fair Project Idea

Imagine how cool it would be to build a robot hand that could grasp a ball or pick up a toy. In this
robotics engineering project, you will learn how to use drinking straws, sewing thread, and a little
glue to make a remarkably lifelike and useful robot hand. What will you design your robot hand to do?
Pick up a can? Move around a ping pong ball? It is up to you! With these starting instructions, you can
design any type of hand. You will simulate human finger anatomy as the basis for a…

Read more



Career Profile

Have you watched “The Transformers” cartoon series or seen the “Transformers” movies? Both shows are about how good and evil robots fight each other and the humans who get in the middle. Many TV shows and movies show robots and humans interacting with each other. While this is, at present, fantasy, in real life robots play a helpful role. Robots do jobs that can be dangerous for humans. For example, some robots defuse landmines in war-stricken countries; others work in harsh environments like…

Read more

Career Profile

Mechanical engineers are part of your everyday life, designing the spoon you used to eat your breakfast, your breakfast’s packaging, the flip-top cap on your toothpaste tube, the zipper on your jacket, the car, bike, or bus you took to school, the chair you sat in, the door handle you grasped and the hinges it opened on, and the ballpoint pen you used to take your test. Virtually every object that you see around you has passed through the hands of a mechanical engineer. Consequently, their…

Read more

Career Profile

Robots are no longer futuristic machines. Robots are here and now and are used in manufacturing, health care, service industries, and military applications. They perform tasks that are repetitive and hazardous—things that humans don’t want to do or are unsafe to do. But robots are still machines, which means they require humans to build, maintain, program, and keep them functioning efficiently. Robotics technicians work with robotics engineers to build and test robots. They are…

Read more

Career Profile

Shakespeare described humans as a “piece of work,” and others have called the body “the most beautiful machine,” but like any machine, sometimes body parts need repairs or servicing when the body cannot take care of the problems itself. That’s where biomedical engineers come in. They use engineering to solve problems in medicine, such as creating replacement body parts, drug-delivery systems, medical instruments, and test equipment. Their work helps restore health and function, and improves the…

Read more

Career Profile

A medical equipment repairer, or medical equipment technician, has an essential role in the fields of healthcare and engineering. From X-ray machines to electric wheelchairs, the medical equipment repairer can fix a wide array of machinery used in hospitals and clinics. They have detailed knowledge of how machines and instruments are to be maintained, how they function, and how to repair them. Broken medical equipment costs hospitals and providers time, money, and may pose safety risks for…

Read more

Career Profile

Do you like working with robotics and cutting-edge machines? Electro-mechanical and mechatronics technologist and technician help engineers in designing and testing robotics equipment. They use testing tools to test performance of electromechanical equipment. They may analyze diagrams to determine order of assembly. Electro-mechanical and mechatronics technologists and technicians test and operate some of the most advanced equipment available. They may work with unmanned aircraft to get visual…

Read more

Source link